Hexin-technology HXSP-1001 RS-232/RS-485/RS-422 to Ethernet TCP/IP Manual de usuario descargar pdf (Pagina 3)

Port memory: 512 byte

Transmit distance: 100m

Interface protection: 1.5KV ESD

Interface type: RJ-45

Serial

NO.of ports: RS-232,RS-422/485 4 bits terminal block

RS-232 signal: TxD, RXD, RTS, CTS, DTR, DSR, DCD, GND

RS-422 signal: Tx+, Tx-, Rx+, Rx-,GND

RS-485 signal: Data+, Data-,GND

Parity: None, Even, Odd, Space, Mark

Data bit: 7bit,8bit

Stop bit: 1, 1.5, 2

Transmission speed: 1200bps ～ 115200bps

Flow control: support RTS/CTS flow control or not flow control.

RS485 data direction: ADDC (Auto data direction Control).

Loading: RS-485/422 side support 32 nodes (optional 128 nodes)

Transfer distance: RS-485/422 side: 1200m, RS-232 side: less than 15m

Port protect: 1500W surge protect,15KV ESD Protect

Port type: RS-232 DB-9 male，RS-485/422 4bit terminal

Power supply

Power supply input: 9VDC

Consumption: 300mA

Environmental

Operating temperature: -20℃～60℃, 5～95% RH

Storage temperature: -25℃～85℃, 5～95% RH

Appearance

Color: blue and white

L×W×H: 100mm×69mm×22mm

Material: Iron

Weight: 230g

【Interface and LED】

10Base-T Ethernet port

Device connected to Ethernet: Red LED flash

Ethernet port has data transfer: Green LED flash

The 10/100BaseT(X) ports located on HXSP-1001 front panel. The pin of RJ45 port

display as below. Connect by UTP or STP. The connect distance is no more than 100m. 100Mbps

is used

100

Ω

of UTP , 10Mbps is used 100

Ω

of UTP 3,4,5

1 2 3 4 5 6 7 8 9

Sin comentarios

Hexin-technology HXSP-1001 RS-232/RS-485/RS-422 to Ethernet TCP/IP Manual de usuario Pagina 3